The Study Influences the Jatropha-Diesel Mixing Ratio to the Formation of Soot Emissions in Diesel Exhaust Gases



Abstract Views
298

Downloads
242

Citations

Share

##plugins.themes.bootstrap3.article.sidebar##

Submitted Aug 7, 2019
Published Aug 19, 2019
10.24018/ejeng.2019.4.8.1470

Abstract viewed = 298 times

Table of Contents

##plugins.themes.bootstrap3.article.main##

To cope with the depletion of fossil fuels and the threat of exhaust pollution from internal combustion engines, research finds alternative fuels. Step by step to completely replace fossil fuels that will be exhausted in the future and environmentally friendly due to internal combustion engines is an urgent and important issue. Diversify fuel sources used for internal combustion engines and environmentally friendly when using Jatropha - Diesel fuel mixture. The paper focuses on studying the ability to use biodiesel derived from Jatropha seeds with the volume ratios of 5%, 10% and 15% on experimental engines. Thereby, it will analyze and evaluate the technical features and pollution levels of engines compared to pure fuels. Experimental study assessing the effect of Jatropha - Diesel mixing ratio on the emission formation compared with emissions in Vikyno EV2600 engines.

Keywords: Carbonyl Compounds Biodiesel Palm Oil Diesel Engines Emissions

Downloads

Download data is not yet available.

References

  1. A. T. Hoang, V. V. Le, V. V. Pham, and B. C. Tham, “An investigation of deposit formation in the injector, spray characteristics, and performance of a diesel engine fueled with preheated vegetable oil and diesel fuel,” Energy Sources, Part A Recover. Util. Environ. Eff., pp. 1–13, 2019.
     Google Scholar
  2. V. V. Pham and D. T. Cao, “A brief review of technology solutions on fuel injection system of diesel engine to increase the power and reduce environmental pollution,” J. Mech. Eng. Res. Dev., vol. 42, no. 1, pp. 01–09, 2019.
     Google Scholar
  3. A. T. Hoang, A. T. Le, and V. V. Pham, “A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel,” Fuel, vol. 244, pp. 159–175, 2019.
     Google Scholar
  4. A. T. Hoang, V. D. Tran, V. H. Dong, and A. T. Le, “An experimental analysis on physical properties and spray characteristics of an ultrasound-assisted emulsion of ultra-low-sulphur diesel and Jatropha-based biodiesel,” J. Mar. Eng. Technol., pp. 1–9, 2019.
     Google Scholar
  5. A. T. Hoang and D. C. Nguyen, “Properties of DMF-fossil gasoline RON95 blends in the consideration as the alternative fuel,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 6, 2018.
     Google Scholar
  6. A. T. Hoang, “The Performance of Diesel Engine Fueled Diesel Oil in Comparison with Heated Pure Vegetable Oils Available in Vietnam,” J. Sustain. Dev., vol. 10, no. 2, p. 93, 2017.
     Google Scholar
  7. A. T. Hoang, C. N. Luong, and A. T. Le, “Properties and Spray Characteristics of Heated Pure Coconut Oil Aiming a Direct Use in Conventional Diesel Engines,” in The 5th TSME International Conference on Mechanical Engineering, 2014.
     Google Scholar
  8. V. V. Pham, “Research and Design an Experimental Model for the Determination of Deposits Formation Mechanism in the Combustion Chamber,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 9, no. 2, pp. 656–663, 2019.
     Google Scholar
  9. V. V. Pham, “Analyzing the effect of heated wall surface temperatures on combustion chamber deposit formation,” J. Mech. Eng. Res. Dev., vol. 41, no. 4, pp. 17–21, 2018.
     Google Scholar
  10. A. T. Hoang and V. V. Pham, “A review on fuels used for marine diesel engines,” J. Mech. Eng. Res. Dev., vol. 41, no. 4, pp. 22–32, 2018.
     Google Scholar
  11. H. A. Tuan and C. M. Quang, “A mini review of using oleophilic skimmers for oil spill recovery,” J. Mech. Eng. Res. Dev, vol. 41, no. 2, pp. 92–96, 2018.
     Google Scholar
  12. V. V. Le and A. T. Hoang, “Fuel and alternative fuel for marine diesel engines,” Int. J. Recent Eng. Res. Dev., vol. 2, no. 7, pp. 142–146, 2017.
     Google Scholar
  13. A. T. Hoang, “Waste heat recovery from diesel engines based on Organic Rankine Cycle,” Appl. Energy, vol. 231, pp. 138–166, 2018.
     Google Scholar
  14. V. D. Tran, A. T. Le, V. H. Dong, and A. T. Hoang, “Methods of operating the marine engines by ultra-low sulfur fuel to aiming to satisfy MARPOLAnnex VI,” Adv. Nat. Appl. Sci., vol. 11, no. 12, pp. 34–40, 2017.
     Google Scholar
  15. M. T. Pham, A. T. Hoang, A. T. Le, A. R. M. S. Al-Tawaha, V. H. Dong, and V. V. Le, “Measurement and prediction of the density and viscosity of biodiesel blends,” Int. J. Technol., vol. 9, no. 5, pp. 1015–1026, 2018.
     Google Scholar
  16. A. T. Hoang, “Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system,” J. Mar. Eng. Technol., pp. 1–13, 2018.
     Google Scholar
  17. A. T. Hoang and V. V Le, “Marine pollution and remedies of Vietnamese Government,” Int. J. Recent Eng. Res. Dev, vol. 2, no. 4, pp. 51–55, 2017.
     Google Scholar
  18. A. T. Hoang, Q. V Tran, and X. D. Pham, “Performance and emission characteristics of popular 4-stroke motorcycle engine in vietnam fuelled with biogasoline compared with fossil gasoline,” Int. J. Mech. Mechatronics Eng, vol. 18, no. 2, pp. 97–103, 2018.
     Google Scholar
  19. A. T. Hoang and M. T. Pham, “Influences of heating temperatures on physical properties, spray characteristics of bio-oils and fuel supply system of a conventional diesel engine,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 5, pp. 2231–2240, 2018.
     Google Scholar
  20. A. T. Hoang and V. T. Nguyen, “Emission Characteristics of a Diesel Engine Fuelled with Preheated Vegetable Oil and Biodiesel,” Philipp. J. Sci., vol. 146, no. 4, pp. 475–482, 2017.
     Google Scholar
  21. A. T. Hoang and V. V. Pham, “Impact of jatropha oil on engine performance, emission characteristics, deposit formation, and lubricating oil degradation,” Combust. Sci. Technol., vol. 191, no. 03, pp. 504–519, 2019.
     Google Scholar
  22. A. T. Hoang, M. M. Noor, and X. D. Pham, “Comparative Analysis on Performance and Emission Characteristic of Diesel Engine Fueled with Heated Coconut Oil and Diesel Fuel.,” Int. J. Automot. Mech. Eng., vol. 15, no. 1, pp. 5110–5125, 2018.
     Google Scholar
  23. A. T. Hoang and V. V. Pham, “A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 41, no. 5, pp. 611–625, 2019.
     Google Scholar
  24. V. V. Pham, “Research on the application of Diesel-Rk in the calculation and evaluation of technical and economic criteria of marine diesel engines using the unified ULSD and Biodiesel blended fuel,” J. Mech. Eng. Res. Dev., vol. 42, no. 2, pp. 87–97, 2019.
     Google Scholar
  25. T. A. Hoang and V. Van Le, “The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil,” Int. J. Renew. Energy Dev., vol. 6, no. 1, p. 1, 2017.
     Google Scholar
  26. A. T. Hoang et al., “Power generation characteristics of a thermoelectric modules-based power generator assisted by fishbone-shaped fins: Part II–Effects of cooling water parameters,” Energy Sources, Part A Recover. Util. Environ. Eff., pp. 1–13, 2019.
     Google Scholar
  27. A. T. Hoang and V. D. Tran, “Experimental analysis on the ultrasound-based mixing technique applied to ultra-low sulphur diesel and bio-oils,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 9, no. 1, pp. 307–313, 2019.
     Google Scholar
  28. A. T. Hoang et al., “An absorption capacity investigation of new absorbent based on polyurethane foams and rice straw for oil spill cleanup,” Pet. Sci. Technol., vol. 36, no. 5, pp. 361–370, 2018.
     Google Scholar
  29. A. T. Hoang, Q. V. Tran, A. R. M. S. Al-Tawaha, V. V. Pham, and X. P. Nguyen, “Comparative analysis on performance and emission characteristics of an in-Vietnam popular 4-stroke motorcycle engine running on biogasoline and mineral gasoline,” Renew. Energy Focus, vol. 28, pp. 47–55, 2019.
     Google Scholar
  30. X. D. Pham, A. T. Hoang, and D. N. Nguyen, “A Study on the Effect of the Change of Tempering Temperature on the Microstructure Transformation of Cu-Ni-Sn Alloy,” Int. J. Mech. Mechatronics Eng., vol. 18, no. 04, pp. 27–34, 2018.
     Google Scholar