##plugins.themes.bootstrap3.article.main##

Drying provides extended shelf life to agricultural crops in general and thus proper design of dryer will assist in drying them to acceptable level and quality. To design adequate dryer, necessary drying parameters of drying materials is necessary. This work involves experimental determination of effective drying parameters such as moisture content, moisture diffusion coefficient, density (true and bulk), specific heat, thermal conductivity and thermal diffusivity of ginger and to analyze these parameters in relation to each other. Fresh ginger rhizomes were washed to remove soil from the field, peeled and washed again in clean water and sliced into thin pieces. The sliced ginger was heat-treated by adding 200ml of clean water and steaming for 5–8 minutes in an aluminum pot, to a temperature of 85–90 oC, and a light brown colour. Microwave oven, calorimeter, desiccators, thermometers, triple beams balance, micrometer screw gauge were used to determine the drying parameters of ginger. Effect of temperature and moisture content on some thermal properties was determined. The results of the experiments shows that average initial moisture content for the ginger samples was 72.31%, the true and bulk densities of the sample increased linearly from 0.5809 to 0.6338g/cm3 and 0.7405 to 0.7972 g/cm3 respectively between the temperatures of 45 – 75 °C. The specific heat capacity of ginger varied from a minimum of 1.568kJkg-1K-1 to a maximum of 2.026kJ kg-1K-1, with temperature in the range of 45oC to 75oC and moisture content in the range of 24.43 to 46.19 % (d.b). The thermal conductivity of ginger samples varied from 0.316×10-3 to 9.763×10-4 Jm-1S-1 oC; as the moisture content and temperature increased. Thermal diffusivity of the ginger increased linearly from 3.149×10-8 to 4.438×10-8 m2s-1 for ginger with increase in moisture content and temperature. Conclusively, the experimental study analysis show that specific heat of ginger varies with temperature. Also, there is variation in length, breath and thickness of ginger when subjected to temperature. Therefore, it can be said that ginger do shrinks when it is subjected to heat.

Downloads

Download data is not yet available.

References

  1. Awang, D.V.C. “Ginger”. Can. Pharm. Journal., vol. 125, pp 309-311, 1992.
     Google Scholar
  2. Wang, Z., Sun, J., Liao, X., Chen, F., Zhao, G., and Wu, J. “Mathematical modeling on hot air drying of thin layer apple pomace”. Journal of Food Engineering, vol.40, pp. 39-46, 2007.
     Google Scholar
  3. Tapsell, T. W., Aristee, G., Donko, P and Wunbeldow, L. Hand Book of Shea Processing Using a Manually Operated Bridge Press. A publication of National Resources Institute of Chathman, England. 1997.
     Google Scholar
  4. Singh, L. A. O., Aviara, V. A and Aregbesola O. A. “Some Engineering Properties of Locust Bean Seed”. Journal of Food Engineering. vol. 55, pp.95-99, 2002.
     Google Scholar
  5. Afolabi, T.J, Tunde-Akintunde, T. Y. and Oyelade, O.J. “Influence of Drying Conditions on the Effective Moisture Diffusivity and Energy Requirements of Ginger Slices”. Jouurnal of Food Research, vol. 3(5): pp 103 – 112, 2014.
     Google Scholar
  6. Bardey, N. N. “Thermal Properties of Food Agricultural Materials”. Gordon and Breach Press. New York. USA, 1980.
     Google Scholar
  7. Aroldo, A., Fernanda, E. X. M., Abraham D. G. and Zilda D. S. A. “Vacuum Drying of Carrot (Daucus carota): Effects of Pretreatments and Parameters Process”. Proceedings of the 14th International Drying Symposium (IDS 2004) São Paulo, Brazil, C: pp.2021-2026, 2004.
     Google Scholar
  8. Doymaz, I. “Drying Behavior of Green Beans”. Journal of Food Engineering. vol. 69, pp 161–165, 2005.
     Google Scholar
  9. Aviara, N. A. and Haque, M. A. “Moisture Dependence of Thermal Properties of Sheanut Kernel”. Journal of food Engineering, vol.47, pp. 109-113, 2001.
     Google Scholar
  10. A.O.A.C. (Association of Official Analytical Chemists). Official Methods of Analysis,15th edn. (Gaithersburg, S. edn). AOAC Press, Washington DC., USA. pp. 78- 90, 1999.
     Google Scholar
  11. Singh, K. K and Goswami, T. K. “Physical Properties of Cumin Seed”. Journal of Agricultural Engineering Research, vol. 64, pp. 93-98, 1996.
     Google Scholar
  12. Oluka, S. I., and Bardey, I. A. “Thermal Properties of Pigeon Pea. Journal of Agric”. Engrineering and Technology.vol. 8, pp.372-379, 2000.
     Google Scholar
  13. Anyakoha, T. “Heat Transfer Through Materials”. Africana first Publisher Onitsha. Pp.63-80. Third edition. (2007).
     Google Scholar
  14. Visvanathan, R., Palanisamy, P.T., Gothandapani, L.and Sreenarayanan, V.V. “Physical properties of neem nut”. Journal of Agricultural Engineering Research, vol. 63(1), pp.19-25, 1996.
     Google Scholar
  15. Nayyeri, M.A., Kianmehr, M.H. Arabhosseini, A. and Hassan-Beygi, S.R. “Thermal properties of dairy cattle manure institute of Agrophysics”, Polish Academy of Sciences, vol.23, pp. 359-366, (2009).
     Google Scholar
  16. Tansakul A. and Lumyong R.. “Thermal properties of straw mushroom”. Journal of Food Engineering, vol. 87, pp. 91-98, 2008.
     Google Scholar
  17. Aviara, N. A and Haque, M. A. “Moisture Dependence of Thermal Properties of Sheanut Kernel”. Journal of food Engineering, vol. 47, pp. 109-113, 2001.
     Google Scholar
  18. Yang, W., Sokahansaj, S., Tang, J. and Winter P. “Determination of Thermal Conductivity, Specific heat Capacity and Thermal diffusivity of borage seeds”. Biosystem Engineering, vol. 82 (2), pp. 169-176, 2002.
     Google Scholar