Improvement The Mechanical Properties of Styrene Butadiene Rubber By Using Silica Fume



Abstract Views
292

Downloads
553

Citations

Share

##plugins.themes.bootstrap3.article.sidebar##

Submitted Dec 20, 2017
Published Dec 27, 2017
10.24018/ejeng.2017.2.12.568

Abstract viewed = 292 times

Table of Contents

##plugins.themes.bootstrap3.article.main##

Styrene butadiene rubber (SBR) is considered to be one of the greatest important polymeric materials used as a bond, so we discussed in this study to improve its properties .This study covers the effect of silica fume on mechanical properties of styrene butadiene rubber reinforced with silica fume. The composites were prepared with (1 to 3 wt. %) of silica fume particles .The results had indicated  that the tensile strength and flexural strength are improved by (11.6% and 13.5%) respectively at 2 wt% and the hardness is  improved by (9.3%) at 3wt%.

Keywords: Silica Fume Composite Materials Styrene Butadiene Rubber.

Downloads

Download data is not yet available.

References

  1. Privalko V, Friedrich K, Walter R, and Savadori A. "On modulus andfracture toughness of rigid particulate filled high density polyethylene", J. Adhesion, Vol. 64, (1997).
     Google Scholar
  2. Marhoon, I.I., Mechanical and Physical Properties of Polyurethane Composites Reinforced With Carbon Black N990 Particles., International Journal of Scientific & Technology Research, Volume 6, Issue 08, pp. 225-228, August 2017.
     Google Scholar
  3. Meinhardt T J, Young R J Lemen R A, Crandall M S, Environmental epidemiologic investigation of the SBR industry. Mortality patterns with discussion of the hematopoietic and lymphatic malignancies. Scandj work environ health 1982; 8:250-259.
     Google Scholar
  4. Bhowmick A K., Sadhu S, Preparation and properties of SBR based nanocomposites: The influence of the structural and processing parameters. J. of appl. Pol. science 2004; 92:698-709.
     Google Scholar
  5. Guo B, Jia D, Lei Y, Liu Xi, Du M, Chen F., SBR/halloysite nanotubes nanocomposites modified by methacrylic acid. Appl. surf. sci. 2008; 255 :2715-2722.
     Google Scholar
  6. Gu Z, Liu W, Gao L, Li H, Li P, Hu X, Song G, Preparation and properties of SBR/natural rubber/organo-bentonitenanocomposites prepared from latex dispersions. Appl. clay sci. 2009; 46: 241-244.
     Google Scholar
  7. Lai S M, Chen C M, Chen W, Preparation, structure, and properties of styrene-ethylenebutylene-styrene block copolymer/clay nanocomposites: Part II fracture behaviors. Eur. pol. j. 2008; 44(11): 3535-3547.
     Google Scholar
  8. Mohan T P, Kanny K, Kuriakose J, Effect of nanoclay reinforcement on structure, thermal and mechanical properties of (NR–SBR). J. of indus. eng. chem. 2011; 17(2):264-270.
     Google Scholar
  9. Jia Q X, Wang Y Q, Yang J, Wu Y P, Zhang L Q, Lu M,.Organic interfacial tailoring of SBR–clay nanocompositesprepared by latex compounding method. J. of appl. pol. sci. 2007; 103(3):1826-1833.
     Google Scholar
  10. Shimpi N G, Mishra S., Mechanical and flameretarding properties of SBR filled with nano-CaCO3 as a filler and linseed oil as an extender. J. of appl. Pol. Sci. 2005; 98(6): 2563-2571.
     Google Scholar