##plugins.themes.bootstrap3.article.main##

Thermal systems in small devices like cooling electronic chips require efficient technologies with small diameter channels. These systems have laminar flow and disrupted boundary layers, leading to high pressure drop values. To ensure sufficient flow and limit coolant temperature, a possible solution is to dynamically deform one channel wall to mimic pumping and disrupt boundary layers, creating a peristaltic effect, called a dynamic heat exchanger. The aim of the present numerical study is to explore the effects of different operating parameters of the dynamic wall heat exchanger on the heat transfer performance. In our numerical study we varied different operating parameters (amplitude of vibration A, frequency f, minimum gap between upper and lower wall H and pressure difference P) and observed how it affects the performance of the dynamic wall heat exchanger in terms of mass flow rate of coolant (water) and heat transfer coefficient. A crucial finding is that the distribution of isotherms and streamlines is adequate, and heat transfer is significant when the relative amplitude is high. Additionally, this type of wall can generate substantial heat transfer even with minimal externally applied pressure.

Downloads

Download data is not yet available.

References

  1. Billah MM, Khan MI, Rahman MM, Alam M, Saha S, Hasan MN. Numerical study of mixed convection heat transfer enhancement in a channel with active flow modulation; 2017. doi: 10.1063/1.4984733.
    DOI  |   Google Scholar
  2. Rafi AA, Tonmoy MTA, Hasan MN. Numerical study of mixed convection heat transfer in an inclined rectangular channel with extruding discrete multiple heaters; 2016. doi:10.1063/1.4958430.
    DOI  |   Google Scholar
  3. Hossain MZ, Islam AKMS. Fully developed flow structures and heat transfer in sine-shaped wavy channels. Int. Comm. Heat Mas Transfer; 2004;31(6):887-896.
    DOI  |   Google Scholar
  4. Selimefendigil F, Öztop HF. Numerical investigation and dynamical analysis of mixed convection in a vented cavity with pulsating flow. Computers & Fluids. 2014; 91: 57–67. doi:10.1016/j.compfluid.2013.11.033.
    DOI  |   Google Scholar
  5. Rabie LH, Mostafa HM. An Experimental Study for Heat Transfer In Laminar Pulsating Annular Flow. Mansoura Engineering Journal (MEJ). 2001;26(2):M54-M65.
    DOI  |   Google Scholar
  6. [Kumar P, Schmidmayer K, Topin F, Miscevic M. Heat transfer enhancement by dynamic corrugated heat exchanger wall: Numerical study. Journal of Physics: Conference Series. 2016; 745: 032061. doi:10.1088/1742-6596/745/3/032061.
    DOI  |   Google Scholar
  7. Schmidmayer K, Kumar P, Lavieille P, Miscevic M, Topin F. Thermo-hydraulic characterization of a self-pumping corrugated wall heat exchanger. Energy. 2017; 128: 713–728. doi:10.1016/j.energy.2017.04.048.
    DOI  |   Google Scholar
  8. Fontaine JM, Pigache F, Miscevic M, Rouchon J-F, Topin F. Studying impacts of travelling wave shape on pumping for active cooling. IEEE International Workshop of Electronics, Control, Measurement, Signals and Their Application to Mechatronics (ECMSM). 2017. doi:10.1109/ecmsm.2017.7945863.
    DOI  |   Google Scholar
  9. Léal L, Topin F, Lavieille P, Tadrist L, Miscevic M. Simultaneous integration, control and enhancement of both fluid flow and heat transfer in small scale heat exchangers: A numerical study. International Communication of Heat and Mass Transfer. 2013;49:36-40.
    DOI  |   Google Scholar
  10. Ahamed S, Uddin MM. Estimating uncertainty of earthquake rupture using Bayesian neural network. Physics Stat. 2019. Retrieved from: arXiv.org. https://arxiv.org/abs/1911.09660v2.
     Google Scholar
  11. Uddin MM. Finite Difference Analysis of Stress Distribution Around an Elliptical Hole in a Plate Subjected to Axial Loading. International Journal of Modern Developments in Engineering and Science. 2023;2(4):1-4. https://journal.ijmdes.com/ijmdes/article/view/119.
     Google Scholar
  12. Uddin MM. Studying the Scratching Behavior of Nb/Nbc Nanolaminate Using Molecular Dynamics Atomistic Simulations. Northern Illinois University. ProQuest Dissertations Publishing; 2020.
     Google Scholar
  13. Uddin MM. Study the effect of different ellipse sizes on the stress distribution around an elliptical hole in a plate subjected to axial loading using Finite difference analysis. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE). 2023 Mar-Apr;20(2 Ser. III):37-41. doi: 10.9790/1684-2002034257.
     Google Scholar
  14. Uddin MM. Study the effect of scratching depth and ceramic-metal ratio on the scratch behavior of NbC/Nb Ceramic/Metal nano-laminates using molecular dynamics simulation and machine learning. arXiv:2305.03698v1 [cond-mat.mtrl-sci]. 2019 May. [Internet]. Available from: https://doi.org/10.48550/arXiv.2305.03698.
     Google Scholar