Experimental Investigation of a Prandtl Probe Fabricated Using Desktop Stereolithography Technology


  •   Alfred Gift Mwachugha

  •   Jean Byiringiro

  •   Harrison Ngetha

  •   Thomas Carolus

  •   Kathrin Stahl


A Prandtl probe is one of the standard instruments used for flow characterization in wind tunnel facilities. The convectional fabrication method of this instrument requires skilled artisanship, precision drilling, lathing and soldering of its several parts. This reflects into high costs of production in turn making wind energy studies expensive. With the adoption of additive manufacturing, the tooling costs, skills required and design to manufacture constraints can be addressed. This research presents a Prandtl probe that was designed using NX™ software, fabricated by desktop stereolithography additive manufacturing platform and validated in a wind tunnel for velocity range of 0 m/s to 51 m/s. This research attested the option of fabricating relatively cheap functional Prandtl probe with desktop stereolithography technology which can be used for accurate determination of flow quality in wind tunnels experiments. This provides various learning and research institution in developing countries that have already invested in additive desktop manufacturing technology certainty and a cheaper option to fabricate wind research instruments for use at their laboratories. Moreover, fabrication and validation of a 5-hole Prandtl probe can also be examined.

Keywords: Prandtl probe, stereolithography, wind tunnel, wind energy studies


Arndt C, Arent D, Hartley F, Merven B, Mondal AH. Faster Than You Think: Renewable Energy and Developing Countries. Annu. Rev. Resour. Econ. 2019;11(1):149–68.

Davidsson H, Bernardo R, Gomes J, Gentile N, Gruffman C, Chea L et al. Construction of Laboratories for Solar Energy Research in Developing Countries. Energy Procedia 2014; 57:982–8.

Clohessy, C. M., Brettenny, W., Sharp, G., & Vorster, F. Evaluation of noise levels of two micro-wind turbines using a randomised experiment. Journal of Energy in Southern Africa 2014;25(1):19-25.

Akello, Philip Oketch, Francis Xavier Ochieng, andJoseph Ngugi Kamau. Performance analysis of a direct drive permanent magnet generator for small wind energy applications. Journal of Sustainable Research in Engineering 2016; 1:1–9.

Selig, M., Deters, R., & Wiliamson, G. Wind Tunnel Testing Airfoils at Low Reynolds Numbers. American Institute of Aeronautics and Astronautics 2011.

Eiduks, M., Viba, J., Shtals, L., Kovals, E., & Noskovs, S. Fluid flow vibration excitation by the control of interaction surface. Engineering for Rural Development (Lavitia) 2011:464–9.

Jin-Jing, T. A. N., Myler, P., & Wen-An, T. A. N. Investigation and Analysis on Racing Car Front Wings. DEStech Transactions on Engineering and Technology Research 2016.

Roberto A, Sausen G, M. A. Statistical Analysis of Wind Tunnel and Atmospheric Boundary Layer Turbulent Flows. Wind Tunnel Designs and Their Diverse Engineering Applications 2013 Mar 6:197–218.

Vern E. Bean and J. Michael Hall. New Primary Standards for Air Speed Measurement at NIST. In Proceeding of the 1999 NCSL Workshop and Symposium Charlottle, NC. 1999, July.

Shinder II, Crowley CJ, James Filla B, Moldover MR. Improvements to NIST'S air speed calibration service. Flow Measurement and Instrumentation 2015; 44:19–26.

Brown GO. Henry Darcy's perfection ofthe Pitot tube. In Henry PG Darcy and Other Pioneers in Hydraulics 2003:14–23.

E. Ower and R. C. Pankhurst. The Measurement of Air Flow, (1977). 5th ed.: Elsevier Ltd Pergamon Press; 1977.

How Desktop 3D Printing is Moving From Makers to Pros. [June 22, 2020]; Available from: https://www.designnews.com/how-desktop-3d-printing-moving-makers-pros.

Griffiths L. How desktop 3D printers became an essential industry tool. [March 04, 2020]; Available from: https://www.tctmagazine.com/additive-manufacturing-3d-printing-news/desktop-3d-printing-essential-industrial-tool/.

Hardware, Materials and Software: the 3 Pillars of 3D Printing Success - AMFG. [April 04, 2020]; Available from: https://amfg.ai/2018/10/24/overcoming-3d-printing-challenges-3-pillars-of-success/.

Thomas. The Evolution of 3D Printing. [April 04, 2020]; Available from: https://blog.thomasnet.com/evolution-of-3d-printing.

Nichols G. Mass production 3D printing? It's coming, and it's a big deal. ZDNet 2019, 22 March 2019; Available from: https://www.zdnet.com/article/mass-production-3d-printing-its-coming-and-its-a-big-deal/. [April 04, 2020].

Erin Winick. 3D printing’s 30 year history and why it’s popular now | by Erin Winick | Medium. [April 04, 2020].

Formlabs Inc. 3D Printing Technology Comparison: FDM vs. SLA vs. SLS | Formlabs. [April 04, 2020].

Thabiso Peter Mpofu, Cephas Mawere, Macdonald Mukosera. The Impact and Application of 3D Printing Technology 2014, June.

Leigh, S. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors. Smart materials and structures. 2014;9(23).

Olasek, K., & Wiklak, P. Application of 3D printing technology in aerodynamic study. Journal of Physics: Conference Series 2014, August;530.

Tourn S, Pallarès J, Cuesta I, Paulsen US. Characterization of a new open jet wind tunnel to optimize and test vertical axis wind turbines. Journal of Renewable and Sustainable Energy 2017;9(3):33302.

Gonzalez Hernandez MA, Moreno Lopez AI, A. A, Perales Perales JM, Wu Y, Xiaoxiao S. Design Methodology for a Quick and Low-Cost Wind Tunnel. " Wind tunnel designs and their diverse engineering applications." 2013(1).

Ahmed N (ed.). Wind Tunnel Designs and Their Diverse Engineering Applications. 1st ed. Janeza Trdine 9, 51000 Rijeka, Croatia: InTech; 2013.

J. Blackledge, B. Kearney, D. Kearney, K. O’Connell and B. Norton. Wind measurement technologies. Materials and processes for energy 2013.

Blazek J. Computational Fluid Dynamics: Principles and Applications. 1st ed. Elsevier: Elsevier; 2001.

Wendt JF. Computational fluid dynamics: an introduction.: Expository cartography for the humanities and social sciences. 3rd ed.: Springer Science & Business Media; 2008.

Joel H. Ferziger, Milovan Peric. Computational Methods For Fluid Dynamics. 3rd ed. Verlag Berlin: Springer; 2001.

Salter, C., Goodman, D. G., & Warsap, J. H. A Discussion of Pitot-static Tubes and of Their Calibration Factors with a Description If Various Versions of a New Design. National Physical Laboratory 1965.

Kira. Wohlers Report 2016 reveals $1 billion growth in 3D printing industry. [April 04, 2020]; Available from: http://www.3ders.org/articles/20160405-wohlers-report-2016-reveals-1-billion-growth-in-3d-printing-industry.html.

Gardan J. Additive manufacturing technologies: state of the art and trends. International Journal of Production Research 2016;54(10):3118–32.

Formlabs Inc. 3D Printing Technology Comparison: FDM vs. SLA vs. SLS | Formlabs. [April 04, 2020].


Download data is not yet available.


How to Cite
Mwachugha, A.G., Byiringiro, J., Ngetha, H., Carolus, T. and Stahl, K. 2020. Experimental Investigation of a Prandtl Probe Fabricated Using Desktop Stereolithography Technology. European Journal of Engineering and Technology Research. 5, 10 (Oct. 2020), 1274–1280. DOI:https://doi.org/10.24018/ejeng.2020.5.10.2202.