Modification and Performance Evaluation of Date Palm Leaf and Leaf-end Pruning Machine



Abstract Views
363

Downloads
332

Citations

Share

##plugins.themes.bootstrap3.article.sidebar##

Submitted Oct 26, 2016
Published Jul 27, 2018
10.24018/ejeng.2016.1.4.179

Abstract viewed = 363 times

Table of Contents

##plugins.themes.bootstrap3.article.main##

Modification of date palm leaf and leaf-end pruning machine was carried out according to the following aspects:  Considering the conventional pruning method, Geometric dimension of the usual garden tool (sickle) or local named Acfea,  Morphological form of date palm tree,  Designed machine dimension.

In this study, the main aims were focused on: Agronomical specifications, - machine net weight, - on farm operation, - application efficiency. To design and develop this machine, a lightweight Hydro-motor as well as proper size frame, handle, proper, hydraulic control valve and a disk-type cutting blade were used. The machine is able to pruning the leaves and leaves-end with depth of up to 10 cm. In general, two changes were considered for on farm application: as a part of date palm service machine and /or a self-operating machine.

In the first phase, because of the lack of enough space for bucket of machine to reach the date palm trunk, pruning operation can be perform from a distance from 1 to 2 meter from the main tree trunk; therefore, the designed machine was equipped with a 3-meter length boom so it can be controlled from the lifting cabin. In the second phase, for the trees that are not higher than 4 meters, the machine can be used as a self-operating machine by ladder.

The machine was equipped with a short and convenient handle, which will help the pruner to reach the tree trunk for pruning the leaves and leaves’ end.

The prototype pruning machine was installed to the tractor MF-285 and site conditions to test and evaluate performs the machine technical and ergonomically parameters was successful. Field operation of tractor mounted leaf and leaf-end pruning machine was performed in Date Palm and Tropical Fruits Research Institute. 95% of the confidence interval of pruning leaf and leaf-end were achieved between 8 to 14 s and 10 to 19 s, respectively. The total pruning time was gained between 9.9 to 13.8 min for each tree.

Keywords: Leaf and Leaf End of Date Palm Pruning Machine Pruning.

Downloads

Download data is not yet available.

References

  1. Anonymous. Agricultural Statistics. Agricultural Ministry. Deputy of planning and programming; 2010.
     Google Scholar
  2. Broschat, T. K. Effects of leaf removal on survival of transplanted Sabal palms. Journal of Arboriculture; 1991. 17(2): 32-33.
     Google Scholar
  3. Corner, E. J. H. The Natural History of Palms. University of California Press. Berkeley and Los Angeles; 1966.
     Google Scholar
  4. Dalrymple, N. K. and J. B. Fisher. The relationship between the number of expanded and developing leaves in the shoot apices of palms. American Journal of Botany; 1994. 81: 1576-1581.
     Google Scholar
  5. Edward F. Gilman and Nathan J. Eisner. Pruning Palms. University of Florida. Fact sheet ENH 853.
     Google Scholar
  6. Hilgeman, R. H. Anatomy and growth of the date palm. Date Growers Institute Annual Report; 1951. 28: 11- 14.
     Google Scholar
  7. Hosseinkhani H., M. Euring and A. Kharazipour. Utilization of date palm pruning residues as row material for MDF manufacturing. Journal of materials sciences research; 2015. Vol. 4, No. 1.
     Google Scholar
  8. Ismail K. M. and K .A. Al-Gaadi. Development and testing of a portables palm tree pruning machine. International Journal of Agricultural Research; 2006. 1: 226-233.
     Google Scholar
  9. Mason, S. E. Partial Thermostats of the Growth Center of the Date Palm. Journal of Agricultural Research; 1925. 31: 415-453.
     Google Scholar
  10. Morton, J. Fruits of Warm Climates. Julia F. Morton. Miami, Florida; 1987.
     Google Scholar
  11. Mostofi, M R, and M R Ehsani. Design, construction and field evaluation of date palm leaf pruning machine; 1996. Research report No. 53/1996.
     Google Scholar
  12. Moustafa A. Fadel. Development of tractor-mounted date palm tree service machine. Emirates Journal of Food and Agriculture; 2005. 17(2): 30-40.
     Google Scholar
  13. Pfalzgraf, Ken. On the pruning of palms. Palms; 2000. 44: 47-49.
     Google Scholar
  14. Popenoe, P. The Date Palm. Field Research Projects. Coconut Grove. Miami, Florida; 1973.
     Google Scholar
  15. Rich, P. M. Mechanical structure of the stem of arbores cent palms. Botanical Gazette; 1987. 148: 42-50.
     Google Scholar
  16. Robinson M. L. Pruning palm trees. University of Nevada. Cooperative Extension; 2004.
     Google Scholar
  17. Rohani, I. Date Palm. Tehran University publication center; 1987. pp 107-113.
     Google Scholar
  18. Rosenfeld Eric. Effects of pruning on the health of palms. Arboriculture and Urban Forestry; 2009. 35(6): 294-299.
     Google Scholar
  19. Shamsi M. and S. M. Mazloumzadeh. Some physical and mechanical properties of date palm trees related to cultural operations industry mechanization. Journal of Agricultural Technology; 2009. V5(1):17-31.
     Google Scholar
  20. Simone, G. W. and G. Cashion. Fusarium wilts of Canary Island Date Palms in Florida. Landscape and Nursery Digest; 1996. pp: 28-31.
     Google Scholar
  21. Swingle, W. T. The Date Palm and its Utilization in the Southwestern United States. USDA Handbook; 1904. No. 53.
     Google Scholar